Maró, fúró sorok és egyedi berendezések - itatech.sk

Go to content

Milling, drilling lines and custom equipment

SN 1900
The high-performance SN 1900 is driven by a gearbox with long-life lubricants and offers the possibility of making various cuts - longitudinal and transverse - regardless of the size and type of profile to be machined.
A two-stage induction motor with electronic controller (35 ÷ 70 m / min), torque controller and cooling system powered by an electric pump, this workstation is a reliable, safe and extremely versatile product.
SD 16
Double-headed cutting machine for cutting PVC and aluminum profiles, with pneumatic head movement, descending blade, manual positioning of the right head with a handwheel and measurement reading on a metric ruler.
Made from an extremely robust and reliable steel and aluminum structure, this is a simple and intuitive device with a two-handed system.
SD 26
Electronically controlled hydropneumatic double-head cutter for cutting PVC and aluminum profiles, with fixed head and moving head, with automatic positioning of the cutting length using a controlled shaft.
The machine is equipped with 2 front 500 mm retractable blades with a pneumatic stop for short cuts on the left head, which allows shorter cuts than the minimum distance between the heads.
GV 250
Single-head saw with a pneumatic blade for making "V" cuts (Notch Transom) on PVC profiles.
Seeing a mobile cutting trolley with 45 ° fixed tilt blades, with the possibility to adjust the height to increase or decrease the size of the “V”, the GV 250 is equipped with a cut that includes 2 blades Ø 250 mm-carbide inserts with pneumatic advance .
GS 225 A
Single-head cutting machine with pneumatic blade advance for cutting PVC glass beads.
Equipped with a 45 ° fixed angle carriage, the GS 225 A has a cutting set consisting of 2 Ø 225 mm and 2 103 mm secondary blades suitable for cutting the ends of the glass bead fixing pin. .
SD 500 S7
Electronically controlled hydropneumatic double saw for cutting PVC and aluminum profiles, with fixed head and moving head, with automatic positioning of the cutting length via a controlled shaft.
The system is equipped with 2 Ø 500 mm vertical climbing blades, with a pneumatic tilt angle between the heads of 90 ° and 45 ° inwards, allowing easy cutting without length corrections in the passages between the angle and the rest.
GS 200 AS
Double saw with controlled shafts for cutting PVC glass beads.
Provided with a 45 ° fixed slope mobile cutting trolley, it is also equipped with a cutting set containing 2 main blades of Ø 200 mm and 2 secondary blades of Ø 98 mm suitable for cutting at the end of the fixing leg of the glazing bead.
F 131
Hand-operated milling machine with 2 heads for easy and fast processing, one for a vertical Cremonese slot and a horizontal three-point drilling unit.
Flexible and professional, ideal for simultaneous processing of handles and holes on PVC profiles, especially on already welded doors.
ST1-A
Automatic double length table with high speed central milling unit for processing the wing change side.
It is designed to automatically mill excess material in the inner corner 2 after welding the door profile 3 and the reduced door profile.
F 164
Automatic milling machine for the production of drainage gaps with automatic working cycle activated by two-hand control.
The device, which is suitable for fast and efficient operation, is equipped with 3 high-frequency, pneumatically moving spindles, which allow it to "split" in 3 directions, combined in pairs, depending on whether it is operating on the sash or frame.
F-104
Made with a robust steel structure leveling foot, each head of the F 104 has 1 copy template with standard figures and 2 pneumatic probes with 3 adjustable diameters with a cutting drill with a diameter of 10 and 12 mm, which make the equipment particularly suitable for drilling and slotting profiles.
F-130
Hand-operated pantograph with 2 heads for easy and fast processing, 1 vertical copy head for burglary and 1 horizontal 3-point drill unit to form handle holes.
The vertical head has standard figures and 2 hand probes with 3 adjustable diameters for 10 and 12 mm diameter drills, while the drilling unit consists of 3 horizontal drills, each of which allows particularly suitable equipment for easy and fast processing.
F-102 S
Single-head pantograph with manual movement for easy and fast passage on vertical and horizontal axes, made of PVC and aluminum profiles.
It is made with a robust steel construction, leveling feet, a copy template with F 102 S standard figures and 2 hand probes, 3 adjustable diameters for cutting machines for 10 and 12 mm diameter drills, which is particularly suitable for tool holes and slots in profiles.
EMV
Numerically controlled, automatic multi-cutting unit with 4 controlled axes for forming cross sections and verticals in PVC.
The plant is equipped with a cutting gear module connected to a servo-ventilation spindle, driven by a motor shaft, which allows the rotation speed to be adjusted for proper processing of each profile.
EMH 8
Automatic multi-cutter milling machine for forming the ends of a transverse vessel in PVC.
Thanks to the precision of its mechanical settings, it is possible to repeat the exact amount of material to be removed.
Specifically designed for insertion into the Fab Cut F1 cutting and machining center, which allows all machining operations to be integrated into a single system, allowing machining, cutting and shaping in the same aisle, providing optimum accuracy and significant time and cost savings. the costs.
Seat
Kopčianska 10 851 01 Bratislava
Warehouse:  94301 Štúrovo, Športová 2402
Contact
Office, accounting: office@itatech.sk
Mobil: +421 910 938 465
Management: info@itatech.sk
Mobil: +421 911 039 156
Media
www.facebook.com/itatech
www.twitter.com/itatech
SKHUUKDE
Back to content